This floor mounted eyewash unit works very well in the workplace: for both industrial, and laboratory environment. It can be mounted onto a floor and operated by hand using push plate. Our eyewash spray heads use soft-flow aerators and automatic pressure compensating valve.
Certified to ANSI/ISEA Z358.1-2014 Standard.
PRODUCT DETAILS – FLOOR MOUNTED EYEWASH WITH ABS PLASTIC BOWL
Eyewash Bowl – 280mm (11″) bowl using chemical resistant ABS in bright yellow colour. For stainless steel, please check model EY 5060AB.
Eyewash Assembly – Stainless steel with ABS spray heads assembly with twin, soft-flow emergency eyewash heads and instant flip-open protective dust cover. The built-in automatic pressure compensating valve assures safe steady flow under varying water supply conditions. In addition, the spray heads also include a filter to protect users against particles from the water flow which may be damaging to the eyes and face.
Control Valve – To ensure continuous water flow, this floor mounted eyewash with ABS Plastic Bowl unit is using a 316 stainless steel 1/2″ IPS valve that stays open until manually closed. Other than that, this unit also has a large, highly visible stainless steel push-plate that operates the control valve.
Pipe and Fitting – 1/2″ and 1″ IPS stainless steel pipe epoxy powder coated in bright yellow colour.
Pedestal – 250mm (10″) aluminium pedestal with 3 mounting holes for 9mm bolts. The pedestal is epoxy powder coated in bright yellow colour.
Waste – 1″ IPS tailpiece
Water Supply – 1/2″ IPS
Signage – Eyewash
Certified to ANSI/ISEA Z358.1-2014 Standard.
| Model | EY 5060 AB |
|---|---|
| Bowl Size | 280 mm |
| Bowl Material | ABS Plastic |
| Nominal Pipe Size | 1 inch |
| Inlet Size | 0.5 inch |
| Flow Rate | At least 15 l/m |
| Recommended Working Pressure | 2 Bar |
| Stanchion | Stainless Steel 304 |
| Connecting Fittings | Stainless Steel 304 |
| Control Valve | Stainless Steel 316 |
| Signage | Eyewash |
| Certification | ANSI Z358.1 & AS 4775 |
